Home Page
Company Profile
Our Products
Mining, Exploration & Drilling Machinery
Machinery
Grinding & Milling Machinery
Shearing Machinery
Lathe Machinery
Contact Us
 
KARAM INDUSTRIES
 
Home » Products » Lathe Machinery » All Geared Lathe

All Geared Lathe



All Geared Lathe

Product Code : 01

Product Specification
All Geared Lathe

Capabilities
  • Height of centre: 177.5mm/200mm (opt)
  • Admit between centres: 800/1000mm
  • Swing over bed: 355mm/400mm
  • Swing over saddle: 276mm/320mm
  • Swing over cross slide: 200mm/250mm
  • Swing in gap: 520mm/565mm
  • Length of gap in front of face plate: 126mm
  • Width of bed: 242mm
  • Length of bed: 1785mm, 1985mm
Head Stock
  • Spindle bore: 35mm/40mm (opt)
  • Taper in spindle: MT5
  • Taper in centre: Mt3
  • Spindle noise: American Lo/A2-4 (opt)
  • Spindle Speeds: 8/16 (opt)
  • Spindle Speed Range: 45-1200 rpm (std), 38-1600 rpm (opt)
Feeds & Threads
  • Number of feeds: 30
  • Range of longitudinal feeds: 0.05 to 3.96mm/rev.
  • Range of transverse feeds: 0.017 to 1.35mm/rev.
  • Metric threads-27: 0.25 to 10 mm
  • Withworth threads-54: 96 to 1 x 5/8 tpi
  • Module threads-22: 0.25 to 5 module
  • Diametral pitch threads-54: 192 to 3 x 1/4 DP
  • Diameter of feed shaft: 18 mm
  • Diameter of leadscrew: 28 mm
  • Pitch of the leadscrew: 6 mm
Slides
  • Saddle traverse: 800/1000 mm
  • Cross slide traverse: 180 mm
  • Toolslide traverse: 108 mm
  • Maximum section of tool: 20 mm  x  20 mm
  • Apron dial graduation: 0.25 mm / div.
  • Crosslide dial graduation: 0.05 mm / div.
  • Toolslide dial graduation: 0.05 mm / div.
  • Toolslide angle of rotation: 90oon either side
Tail Stock
  • Diameter of spindle: 45 mm
  • Spindle raverse: 180 mm
  • Taper in spindle: Morse 3
  • Tailstock dial duration: 0.05 mm / div.
Power
  • Motor for main drive: 2.2 Kw (3HP), 1440rpm - std 1.1/2.2 kW (1.5 / 3 hp); (opt) 1440 / 2880 rpm ; 415 V ; 3 phase, 50 Hz, AC
  • Motor for coolant pump: 0.09 Kw(0.125 hp) 2880 rpm,415 V, 3 phase, 50 Hz, AC; 30 LPM
Overall Dimensions And Weights
  • Floor area of machine: 2300mm  x  1000mm, 2500mm  x  1000mm
  • Approx. net weight: 950kgf / 1000kgf
  • Approx. gross weight: 1200kgf / 1250kgf
  • Size of case: 2380 x 1500 x 1630 mm, 2580 x 1500 x 1630 mm
<< Back


 

Radial Drilling Machine
Radial Drilling Machine
Floor Boring Machine
Floor Boring Machine
Horizontal Milling Machine
Horizontal Milling Machine
Under Crank Guillotine Shears (Cast Iron Body)
Under Crank Guillotine Shears (Cast Iron Body)
All Geared Lathe
All Geared Lathe
 


Contact Details
 
 
KARAM INDUSTRIES
Kahnuwan Road, Simble Chowk, Batala - 143505, Punjab, India
Phone:91-1871-223153/226218/329425 (R)
Fax:91-1871-223153
Send Mail   Send SMS   
Key Personnel
Mr. Tarlok Singh Vohra (Chief Executive Officer)
Mobile:+919417282015

 
 


Copyright © 2011-12 by KARAM INDUSTRIES All Rights Reserved.